This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home User 10 IP Limitation

Can someone explain to me how the 10 IP limitation is calculated for home users?  I have received several e-mail notifications that I am close or over my 10 users, and I suspect it is because I have changed several IPs from DHCP to static.  I suspect that when I change the IP of a component in a given day, Astaro will flag it as two IPs used during that day.  Does a daily overage in one day add on to the next?  Is there a way to refresh the list?


This thread was automatically locked due to age.
Parents
  • No daily averaging... the IPs "live" in the licensing DB for 7 days ... so if an IP has not been used for at least 7 days, that licensed IP is released.
  • No daily averaging... the IPs "live" in the licensing DB for 7 days ... so if an IP has not been used for at least 7 days, that licensed IP is released.

    i have a small personal network (5 server and 2 pcs), but i have a 6000 email acount from my personal foro and i have more than 500.000 emails per day.. the home license can work?
  • FYI
    1000 concurrent connections on a home use license.
  • Yes.. the amount of emails per day is very Hi, but i have only 7 protected Server.. my only question is if the Home license can handle the amount of conections (300 concurrent users aprox) and reponding to Simon Shaw, NO i am Not a Spammer... or i dont need an AntiSpam Solutions. but i have a a personal hosting for my classmate university and we receive 500.000 email per day for this emails accounts, because the entire University have a personal email in my servers.
    Today my firewall protection is from IPCOP, but i Love Astaro and want to remplace whit Astaro.


    Astaro is very cheap to purchase in the grand scheme of things. If a university has hired you to host their email which I couldn't even begin to think why a university would need to, then you should put together a price for email hosting that would cover any cost of ownership on hardware/software and your time. And if you're just giving it away, you might want to either invest or get some of your users to cough up a couple dollars to invest in a new system for you to use.

    Just to put things in to prospective. The company I work for has 1700 email users. We receive about 70,000 emails a day. Normally 60-70% of those are spam. You're asking to run 8.5 times what we do which would put your user count around 14,000 users and you say you don't need any spam/virus protection? This smells funny to me boys and girls...

    How are you queueing this many emails? What kind of connection are you using?
  • Hi Loller:  when using a "home license - 10 IPs"... of course assuming under the guise of honesty that one IS indeed just under 10 computers... all those 10 computers (IP addresses) avail of the following services "concurrently" (or all at the same time):

    • packet rules
    • NAT
    • HTTP proxying
    • SMTP proxying
    • intrusion protection (ie: from P2P's, warez, etc)
    • and of course, my favorite... MONITORING, ACCOUNTING, and REPORTING!


    That's just to name a few that are enabled in the home edition.  Now when you exceed more than 10 IP's or computers, for example if you're using transparent HTTP proxying (which I love because it lets me monitor my users without intruding on their computers), only 10 computers can browse the internet at the same time, the rest will just get a "squid proxy error" or some other generic accessibility error which simply means the firewall is trying to limit access to only 10 IPs.  Same goes for the rest of the above services.

    =========================

    And to the 6000 account guy a few threads ago... all I can say is:  WHOA! I bet you gotta have a helluva bandwidth and really souped up PC to run your "home license" firewall to cope up with all that concurrent traffic.  [H]

    Have you tried running an MTA on that?  [:O]
  • Maybe buy a small netgear/linksys box and nat the 3 DS's and the TV receiver? 
    Or NAT all your wireless. (laptops, DS).


    I'm sure there's one around here somewhere but I'd really rather not double-NAT.

    Maybe Astaro could just eliminate IPs that are only using the packet filter from the license count.  That would certainly buy me some time.  I only enable web security for the kids' computer.  At least until they figure out how to get around it.  [:)]

    A 10 IP address limit is just not realistic.  Too many non-workstation devices are IP/WiFi enabled now.  The number of IP devices on my network is only going to go up, but we'll still just be a household of four.

    Not to mention the fact that "hiding" additional devices behind a NAT router is probably a violation of the Home-Use license agreement.
  • Right. So if you do the math 500,000 / 24 hours is 20833 per hour avrage + 300 users avrage as quoted. I would say that you would easly exceed you 1000 connection limit and if so the mail would back up and just compond the problem.
  • Right. So if you do the math 500,000 / 24 hours is 20833 per hour avrage + 300 users avrage as quoted. I would say that you would easly exceed you 1000 connection limit and if so the mail would back up and just compond the problem.


     exim has a smtp_accept_max=20 connection limit afaik so the iptables connection limit wont be a problem - as long as he uses exim and not just routing mails in and out ...
  • I'm trying to use my satellite receiver to download a couple things for the first time and I hit 12 IP addresses so it failed.

    The Astaro is counting wireless access points, too, which is pretty lame.  So, apparently, the first wireless computer counts as two IP addresses, and for coverage I have three access points, so it could count as 4.

    Astaro REALLY needs to address this, especially for ASG-110 users, not just home users.

    I wonder if I don't put a default gateway in the access points or other local-only devices if they will ever be counted.  I suppose I could also put them on a separate IP network, and change my laptop to that network should I ever need to administer them.  That might also work.

    I need to figure out how to purge the IP address database.
  • The APs won't get counted if you set them up right.
    1. Don't hookup the WAN interfaces on the APs
    2. Give the management interfaces a static IP (no DHCP), with no gateway

    Here are the commands to reset the license count, but they don't always help.
    cc set licensing active_ips []
    cc set licensing user_limit_exceeded 0

    Regardless, IPs counted drop off after 7 days inactive.

    Barry
  • Thanks.

    Regarding the Access Points, I have removed the gateway where possible and inserted a bogus IP as a gateway where the AP required something.  I figure as long as it's not giving traffic to the ASG, I'm good to go.

    I also think I figured out where the IPs are gleaned from and how to clear them out using sqlite but I'm not sure how much more I should say.  [:)]
    I have to wait until the license process updates the table before I know if it actually worked.

    (How did you get a 50-IP Home License?)
  • (How did you get a 50-IP Home License?)


    They were handed out to active beta testers, in the 7.1 beta process iirc.

    This time (7.3beta), they're giving out $ instead.

    Barry
Reply Children