Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 3 subscribers
  • Views 325 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Driving the CPU to 100%

RFCat_vk_01
I think I might have found why the CPU runs up to 100%. If you mis-configure a series of time definitions so that they overlap the CPU seems to increase its utilisation.

Ian M.

I haven't forgotten, just microsoft declared my genuine vista 32 not genuine anymore and I had to start rebuilding by PC from scratch and the dominant ISP took adsl service off for 6 hours, they shouldn't have been touching it.


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to drees
    Hi Ian, 

    can you please be more precise on how to reproduce this issue, so our Engineers can verify if this is case and if yes, fix it. 

    Thanks
    Gert
  • 0 in reply to Gert Hansen
    Hi Gert,
    I didn't respond to your request earlier because I thought it might have been identified under v7.1xx testing.

    Yesterday 30th Nov 2007 I was able to drive the CPU to 100% for the duration of the overlapping time slots.

    I had a "block" time slot active at the same time as similar time slot to "allow" traffic through.

    I have time managed access in both HTTP and Packet Filter.

    I have attached 2 snapshots of the offending time slots. Neither is configured in the faulty condition in the snapshots.

    Ian M