This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allocating to much swap - please check

J have a problem with my astaro 4.016

every 2 ou 3 days , from midnight i have almost a full memory usage (especially memory) with a max of swap.

My ASL is a 2 Ghz CPU and 512 MB of RAM (DDR SDRAM) , SCSI disk (Adaptec AIC-7892A U160/m) 

after many of these messages :

2004-Jan  7 01:08:10 (none) superdaemon.pl[672]: [WAR 103] Allocating to much swap - please check

ASL stop working.

My daily kernel log is about 6 to 10 Mo

And I put the right rules to drop (not log) the broadcast and the ports 135, 137 , 139 packets.

 Do you think that 6 to 10 Mo of Kernel log ( 500 000 lines) need more than 512 Mo of Ram ???? 


In the HCL-4_0_15_1_2004.txt, I read : 

tested server :

COMPAQ ML 330/350/370(G2) Smart Array 5i or 532, SCSI-HDD 36GB max!!!      |
 not running with adapter card 29160!!           ????


SCSI cards :

 AIC-7892A U160/m                                |   | X |    |           | ?????

ASL has this card

I trust the server tested or the scsi expected to work    ??????



/proc/interrupts

         CPU0       
  0:      10882    IO-APIC-edge  timer
  1:        931    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  8:          1    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 14:          2    IO-APIC-edge  ide0
 16:      17253   IO-APIC-level  aic7xxx
 23:       4289   IO-APIC-level  eth0
 24:       1446   IO-APIC-level  eth1
NMI:          0 
LOC:      10835 
ERR:          0
MIS:          0



/proc/ioports

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1800-18ff : Compaq Computer Corporation Advanced System Management Controller
2000-200f : ServerWorks CSB6 RAID/IDE Controller
  2000-2007 : ide0
  2008-200f : ide1
2400-24ff : Adaptec AIC-7892A U160/m
2800-28ff : ATI Technologies Inc Rage XL
2c00-2c3f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper)
  2c00-2c3f : e1000
2c40-2c7f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2)
  2c40-2c7f : e1000


/proc/pci


PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: ServerWorks GCNB-LE Host Bridge (rev 50).
  Bus  0, device   0, function  1:
    Host bridge: ServerWorks GCNB-LE Host Bridge (#2) (rev 0).
  Bus  0, device   1, function  0:
    SCSI storage controller: Adaptec AIC-7892A U160/m (rev 2).
      IRQ 16.
      Master Capable.  Latency=64.  Min Gnt=40.Max Lat=25.
      I/O at 0x2400 [0x24ff].
      Non-prefetchable 64 bit memory at 0xf7ff0000 [0xf7ff0fff].
  Bus  0, device   3, function  0:
    Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 2).
      IRQ 19.
      Master Capable.  Latency=64.  Min Gnt=64.
      Non-prefetchable 64 bit memory at 0xf7fe0000 [0xf7feffff].
  Bus  0, device   4, function  0:
    VGA compatible controller: ATI Technologies Inc Rage XL (rev 39).
      Master Capable.  Latency=64.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xf6000000 [0xf6ffffff].
      I/O at 0x2800 [0x28ff].
      Non-prefetchable 32 bit memory at 0xf5ff0000 [0xf5ff0fff].
  Bus  0, device   5, function  0:
    System peripheral: Compaq Computer Corporation Advanced System Management Controller (rev 0).
      IRQ 18.
      I/O at 0x1800 [0x18ff].
      Non-prefetchable 32 bit memory at 0xf5fe0000 [0xf5fe00ff].
  Bus  0, device   7, function  0:
    Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 1).
      IRQ 23.
      Master Capable.  Latency=64.  Min Gnt=255.
      Non-prefetchable 64 bit memory at 0xf5fc0000 [0xf5fdffff].
      I/O at 0x2c00 [0x2c3f].
  Bus  0, device   7, function  1:
    Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2) (rev 1).
      IRQ 24.
      Master Capable.  Latency=64.  Min Gnt=255.
      Non-prefetchable 64 bit memory at 0xf5fa0000 [0xf5fbffff].
      I/O at 0x2c40 [0x2c7f].
  Bus  0, device  15, function  0:
    ISA bridge: ServerWorks CSB6 South Bridge (rev 160).
      Master Capable.  Latency=32.  
  Bus  0, device  15, function  1:
    IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev 160).
      Master Capable.  Latency=64.  
      I/O at 0x2000 [0x200f].
  Bus  0, device  15, function  2:
    USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 5).
      IRQ -19.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xf5f90000 [0xf5f90fff].
  Bus  0, device  15, function  3:
    Host bridge: ServerWorks GCLE-2 Host Bridge (rev 0).


What about the chipset ServerWorks GC



thank you

  


This thread was automatically locked due to age.
Parents Reply Children
  • Thank you very much for you answer William but my question was very simple :

    Do you think that 6 to 10 Mo of compressed Kernel log ( 500 000 lines) need more than 512 Mo of Ram ???? 

    Is there anybody that has a kernel log with about 500 000 lines and how much memory is he using ?

    merci beaucoup  
  • well all of those logs are compressed by about 10x so in that regard yes you need more ram for logs that are 6-10 megs compressed......I would add atleast naother 256 megs to start..or find a way to reduce your logfile sizes..[:)]