This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allocating to much swap - please check

J have a problem with my astaro 4.016

every 2 ou 3 days , from midnight i have almost a full memory usage (especially memory) with a max of swap.

My ASL is a 2 Ghz CPU and 512 MB of RAM (DDR SDRAM) , SCSI disk (Adaptec AIC-7892A U160/m) 

after many of these messages :

2004-Jan  7 01:08:10 (none) superdaemon.pl[672]: [WAR 103] Allocating to much swap - please check

ASL stop working.

My daily kernel log is about 6 to 10 Mo

And I put the right rules to drop (not log) the broadcast and the ports 135, 137 , 139 packets.

 Do you think that 6 to 10 Mo of Kernel log ( 500 000 lines) need more than 512 Mo of Ram ???? 


In the HCL-4_0_15_1_2004.txt, I read : 

tested server :

COMPAQ ML 330/350/370(G2) Smart Array 5i or 532, SCSI-HDD 36GB max!!!      |
 not running with adapter card 29160!!           ????


SCSI cards :

 AIC-7892A U160/m                                |   | X |    |           | ?????

ASL has this card

I trust the server tested or the scsi expected to work    ??????



/proc/interrupts

         CPU0       
  0:      10882    IO-APIC-edge  timer
  1:        931    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  8:          1    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 14:          2    IO-APIC-edge  ide0
 16:      17253   IO-APIC-level  aic7xxx
 23:       4289   IO-APIC-level  eth0
 24:       1446   IO-APIC-level  eth1
NMI:          0 
LOC:      10835 
ERR:          0
MIS:          0



/proc/ioports

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1800-18ff : Compaq Computer Corporation Advanced System Management Controller
2000-200f : ServerWorks CSB6 RAID/IDE Controller
  2000-2007 : ide0
  2008-200f : ide1
2400-24ff : Adaptec AIC-7892A U160/m
2800-28ff : ATI Technologies Inc Rage XL
2c00-2c3f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper)
  2c00-2c3f : e1000
2c40-2c7f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2)
  2c40-2c7f : e1000


/proc/pci


PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: ServerWorks GCNB-LE Host Bridge (rev 50).
  Bus  0, device   0, function  1:
    Host bridge: ServerWorks GCNB-LE Host Bridge (#2) (rev 0).
  Bus  0, device   1, function  0:
    SCSI storage controller: Adaptec AIC-7892A U160/m (rev 2).
      IRQ 16.
      Master Capable.  Latency=64.  Min Gnt=40.Max Lat=25.
      I/O at 0x2400 [0x24ff].
      Non-prefetchable 64 bit memory at 0xf7ff0000 [0xf7ff0fff].
  Bus  0, device   3, function  0:
    Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 2).
      IRQ 19.
      Master Capable.  Latency=64.  Min Gnt=64.
      Non-prefetchable 64 bit memory at 0xf7fe0000 [0xf7feffff].
  Bus  0, device   4, function  0:
    VGA compatible controller: ATI Technologies Inc Rage XL (rev 39).
      Master Capable.  Latency=64.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xf6000000 [0xf6ffffff].
      I/O at 0x2800 [0x28ff].
      Non-prefetchable 32 bit memory at 0xf5ff0000 [0xf5ff0fff].
  Bus  0, device   5, function  0:
    System peripheral: Compaq Computer Corporation Advanced System Management Controller (rev 0).
      IRQ 18.
      I/O at 0x1800 [0x18ff].
      Non-prefetchable 32 bit memory at 0xf5fe0000 [0xf5fe00ff].
  Bus  0, device   7, function  0:
    Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 1).
      IRQ 23.
      Master Capable.  Latency=64.  Min Gnt=255.
      Non-prefetchable 64 bit memory at 0xf5fc0000 [0xf5fdffff].
      I/O at 0x2c00 [0x2c3f].
  Bus  0, device   7, function  1:
    Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2) (rev 1).
      IRQ 24.
      Master Capable.  Latency=64.  Min Gnt=255.
      Non-prefetchable 64 bit memory at 0xf5fa0000 [0xf5fbffff].
      I/O at 0x2c40 [0x2c7f].
  Bus  0, device  15, function  0:
    ISA bridge: ServerWorks CSB6 South Bridge (rev 160).
      Master Capable.  Latency=32.  
  Bus  0, device  15, function  1:
    IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev 160).
      Master Capable.  Latency=64.  
      I/O at 0x2000 [0x200f].
  Bus  0, device  15, function  2:
    USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 5).
      IRQ -19.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xf5f90000 [0xf5f90fff].
  Bus  0, device  15, function  3:
    Host bridge: ServerWorks GCLE-2 Host Bridge (rev 0).


What about the chipset ServerWorks GC



thank you

  


This thread was automatically locked due to age.
  • what all do you have the ASL doing?  You may need more memory.. 
  • Thank you very much for you answer William but my question was very simple :

    Do you think that 6 to 10 Mo of compressed Kernel log ( 500 000 lines) need more than 512 Mo of Ram ???? 

    Is there anybody that has a kernel log with about 500 000 lines and how much memory is he using ?

    merci beaucoup  
  • well all of those logs are compressed by about 10x so in that regard yes you need more ram for logs that are 6-10 megs compressed......I would add atleast naother 256 megs to start..or find a way to reduce your logfile sizes..[:)]
  • With the price of RAM now a days, you might as well start with an additional 512mb.  Should be around $75.00 depending on type and speed of ram your system needs.  Another reason I suggest 512 over 256 is because, depending on your system, if you do find out that you need 512 instead of 256, you might have to take out your 256 that you just bought to fit in a 512 chip (or 2x256).