Hello Friends !
Additional Addresses create but now able to see at terminal
acenn:/home/login # ip addr
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:1c:c0:aa:21:8c brd ff:ff:ff:ff:ff:ff
inet 192.168.2.100/24 brd 192.168.2.255 scope global eth0
inet 192.168.1.10/24 scope global eth0
3: eth1: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:60:08:9b:a5:79 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.125/24 brd 192.168.1.255 scope global eth1
4: tun0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/[65534]
inet 10.242.2.1 peer 10.242.2.2/32 scope global tun0
5: ppp0: mtu 1396 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.242.1.1 peer 10.242.1.2/32 scope global ppp0
acenn:/home/login # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1C:C0:AA:21:8C
inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19595 errors:0 dropped:0 overruns:0 frame:0
TX packets:29378 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5131062 (4.8 Mb) TX bytes:20437935 (19.4 Mb)
Interrupt:27 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:60:08:9B:A5:79
inet addr:192.168.1.125 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25671 errors:0 dropped:0 overruns:0 frame:0
TX packets:21463 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22443342 (21.4 Mb) TX bytes:2191369 (2.0 Mb)
Interrupt:21 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:133070 errors:0 dropped:0 overruns:0 frame:0
TX packets:133070 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32442572 (30.9 Mb) TX bytes:32442572 (30.9 Mb)
ppp0 Link encap[:P]oint-to-Point Protocol
inet addr:10.242.1.1 P-t-P:10.242.1.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1
RX packets:2515 errors:0 dropped:0 overruns:0 frame:0
TX packets:2775 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:257541 (251.5 Kb) TX bytes:1675948 (1.5 Mb)
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.242.2.1 P-t-P:10.242.2.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
but i was able to ping that ip
why /what is UNKNOWN state
thanks
update why number are not in seqence
acenn:/home/login # ip addr show
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:1c:c0:aa:21:8c brd ff:ff:ff:ff:ff:ff
inet 192.168.2.100/24 brd 192.168.2.255 scope global eth0
inet 192.168.1.15/24 scope global eth0
inet 192.168.1.10/24 scope global secondary eth0
inet6 fe80::21c:c0ff:feaa:218c/64 scope link
valid_lft forever preferred_lft forever
3: eth1: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:60:08:9b:a5:79 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.125/24 brd 192.168.1.255 scope global eth1
inet6 fe80::260:8ff:fe9b:a579/64 scope link
valid_lft forever preferred_lft forever
4: tun0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/[65534]
inet 10.242.2.1 peer 10.242.2.2/32 scope global tun0
7: ppp0: mtu 1396 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.242.1.1 peer 10.242.1.2/32 scope global ppp0
acenn:/home/login #
