Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 29 subscribers
  • Views 14886 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Accessing Local subnet over Remote SSL VPN Range network

Darius Sz

Created SSL VPN by following the KB122769 with the following settings:

IP Host - Local subnet 192.168.3.0

IP Host - VPN Range 10.10.10.1 to .25

Under SSL VPN (Remote Access) I have Identity of Remote SSL Group and under Tunnel Access I have added local subnet 

 

I can connect to the VPN and I can confirm that my IP is 10.10.10.5

I cannot reach any network devices on the 192.168.3.0 network. What routing setting would i need to adjust to be able to i.e. RDP to 192.168.3.100 ?

 

Thanks in advance



This thread was automatically locked due to age.
Parents
  • 0

    Did you create a firewall rule to allow your ‘VPN Range’ IP host from source zone of ‘VPN’ to access your ‘Local subnet’ on destination zone ‘LAN’?

    I typed up this guide on the steps I took to setup SSL VPN. Might be worth taking a quick look to see if there’s any other steps to do. I found the Sophos How-To Video incomplete but that KB article was pretty good.

  • 0 in reply to shred

    Hello there, 

    Is this thread still active as I am having the similar issue and have followed all the steps but still not able to access the local resources. 

Reply Children