Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 27 subscribers
  • Views 3469 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos VLAN

Brad Fuller

Hi!

Migrated Cyberoam to Sophos XG 17.0.2-MR2

Port A - 192.168.0.1
port A.10 - 10.10.10.1
port A.20 - 10.10.20.1

 

My HP 1820-24G-PoE switch is not picking up the VLANs

Any one do the VLANs between a Sophos and a HP 1820?

I've set up a DHCP Server on the Sophos for port A.10 and one on A.20, but nothing is getting an IP.  Tagged switch port 10 for both VLANs as that is the one that connects to the Sophos, then port 7 is tagged for vlan 10 port 8 is tagged for vlan 20

 

What am I missing?

 

Thanks!

 

Brad.



This thread was automatically locked due to age.
Parents
  • +1

    On your HP-1820 switch what mode is the port set to (truck, general, etc)? I am not sure how it is done on your switch but I have a Ubiquity Edgeswitch hanging off my firewall and this is how it is configured. Using your above configuration as an example:

    PortA - 192.168.0.1              Switchport "1"           VLAN 1       Untagged

    PortA.10 - 10.10.10.1           Switchport "1"           VLAN 10     Tagged

    PortA.20 - 10.10.20.1           Switchport "1"           VLAN 20     Tagged

     

    As you can see their is only one ethernet port on the firewall being used and it is connected to switch port "1". Now when I have a device (say a windows desktop) plugged in to say port 15 I have port 15 configured on the switch for it to be a member of VLAN 10 and is untagged.

     

    Hope this helps.

    -Ron 

  • 0 in reply to rrosson

    good to go!

    Sophos Port A - 192.168.0.1
    DHCP Port A - Relay to DHCP Server at 192.168.0.10 for wired stations
    On Switch Port 1
    VLAN 1 - Untagged
    VLAN 10, 20, 30 - Tagged

    Sophos A.10 - 10.10.10.1
    DHCP - 10.10.10.20 - 10.10.10.200
    Sophos A.20
    DHCP - 10.10.20.20 - 10.10.20.200
    Sophos A.30 - 10.10.30.1

    Ubiquity AP on Switch port 10
    VLAN 1 - Untagged
    VLAN 10, 20, 30 - Tagged

    Three wireless networks, Guest, Internal, Staging. 

    Works perfect.

     

Reply
  • 0 in reply to rrosson

    good to go!

    Sophos Port A - 192.168.0.1
    DHCP Port A - Relay to DHCP Server at 192.168.0.10 for wired stations
    On Switch Port 1
    VLAN 1 - Untagged
    VLAN 10, 20, 30 - Tagged

    Sophos A.10 - 10.10.10.1
    DHCP - 10.10.10.20 - 10.10.10.200
    Sophos A.20
    DHCP - 10.10.20.20 - 10.10.20.200
    Sophos A.30 - 10.10.30.1

    Ubiquity AP on Switch port 10
    VLAN 1 - Untagged
    VLAN 10, 20, 30 - Tagged

    Three wireless networks, Guest, Internal, Staging. 

    Works perfect.

     

Children
No Data