Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 5375 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BRIDGE Mode for transparent reporting - No internet access

Johan LE HELLOCO

Hi, 

I have an issue with an XG210 - SFOS16.05.

I used the Bridge Wizard to create the bridge, and everything seems to work like a charm then I discover I had no more internet resolution.

Here is my configuration :

 

INTERNET > RouteurCISCO (192.168.10.254) > Port4_XG210_Port1,2,3 (192.168.10.253) > Switching with more than 40 users

"BR" network is the pairing of Port1,2,3, and 4. 1,2,3 are LAN, 4 is WAN.

 

I used 8.8.8.8 for DNS.

I see, in the reporting tabs, all the traffic going to the XG from the LAN.

I can receive email sent by the XG210 (backup and link_down) on an outside mail domain.

But none of the users are accessing the Internet. Some services seems to connect, but I think it is because of IP connexion, not FQDN.

Can you help me ?

 

Cordially, 
Johan LE HELLOCO



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to rfcat_vk

    Hi, thanks for your answer.

    As I said, I used the wizard, which adds the correct Rules : Anyone, Anyservice, Authorize always. Plus SMTP/SMTPS Business Rule for emailing.  

    And I wanted the XG to be transparent, for reporting ONLY. To make SAR reporting. That's why I have the CISCO routeur ; not doing any change to my client networking right now.

  • 0 in reply to Johan LE HELLOCO

    Ok guys, I fix my problem.

    A little warning for others who would like to use the WIZARD : when you change to "Bridge mode" and select you Wan link, don't forget it uses a /30 for IP LAN Address !!
    You have to change it back to your correct LAN MASK Address ...

    That was my issue, everything is ok now.