Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 41 replies
  • Subscribers 28 subscribers
  • Views 106610 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall Traffic/Rules

MichaelCreamer

I am now having an issue with my firewall rules.  Traffic does not seem to be passing through them.  I also don't see any sessions.  I have it set up in gateway mode, and port 2 directly connected to my NetGear Router.  I see the gateway is up and I can ping out.  Little help please

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi Michael,

    Check #1.1 in my troubleshooting guide and take a packet capture on the Source IP address. You can see which FW-rule ID forwards the traffic. If you are able to ping but the traffic is not accounted on the fw-rule then you have a different issue.

    Thanks

  • 0 in reply to sachingurung

    Since it appear my problem to be  Asymmetric routing i added the bypass rule.  its unusual because I also did a show packet dump and the system shows traffic out 172.16.16.23 to 172.16.16.9 (macbook Lan) on 550805 with ACK.  The reason i say strange s because I set DHCP as 172.16.16.50-150 and I am seeing 6 DHCP addresses, but still no traffic through the firewall, yet I can do a trace route and it shows me that traffic is going out my 192.168.1.1 gateway. 

  • 0 in reply to MichaelCreamer

    on the tracert whats the 1st enty? is it the XG LAN ip??  I think it might be where your router has both the XG LAN & WAN ports in it.  Try taking the LAN port out the router and connecting to a machine then try again.

     

    JK

Reply Children