Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 26 subscribers
  • Views 12612 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG-650 v1 vs XG-650 v2

Remigio Lam

Had to "upgrade" from XG-650v1 to XG-650v2, apparently the fiber interfaces changed names, on v1 they were PortBx, now they show up as PortEx. Restored from v1 backup, found out that what used to be MGMT1 is now assigned to PortE1, cannot bring up interfaces, cannot use the fine appliance...

Could anyone please confirm the above behavior?, worst case scenario, which I am not looking forward is start from scratch. Maybe someone knows how to reassign the interfaces from the console?

Thanks.



This thread was automatically locked due to age.
Parents
  • 0

    Remigio, using the console you should be able to change the ip for each port and get access to web interface where you can reassign interfaces properly.

  • 0 in reply to lferrara

    Hi,

    The menu driven interface only shows the configured interfaces, i.e. interface PortE1 is 10Gbps, nothing I did brought it up, ifconfig showed no link. Is there any other way to do it? (i.e. advanced shell?)

    The appliance was originally configured as a bridge, copper ports were not in use. The original config on the v1 had the Mgmt port working, when I restored it on v2, the IP address was assigned to PortE1, so, no way to connect via the network and the MGMT port no longer shows up.

    Anyway, since these are brand new appliances, I wiped them out, the 10Gbps port was now able to see the switch. I have the feeling I will have to start from scratch. Waiting to hear back from Sophos support.

    Thanks.

  • 0 in reply to Remigio Lam

    Remigio,

    Did you try the option: system appliances_access enable, from console?

    From advanced shell you can try to bring the bridge up using  the brctl command.

    Let us know

  • 0 in reply to lferrara

    If I read the manual correctly, the appliances_access enable should disable all the firewall rules?, if that is the case, I still have the problem that none of the interfaces show as up (as per ifconfig and ethtool).

    I really didn't want to start using the native OS commands, I will try to bring one of the copper interfaces up manually and see what happens (fresh restore, just to play it safe).

    I will keep you posted.

    Thanks.

  • 0 in reply to Remigio Lam

    Issue resolved. After restoring the 2nd time, the fiber port showed as UP, even though it had the wrong IP address, I was able to make the changes via the console and then regain GUI. The rest was just reassigning the interfaces used by the bridge.

    Thanks.

    R.

Reply Children
No Data