Unable to boot after download and successful install for free home edition xg firewall

Chris,

Make sure to enable Enable Intel VT-x feature from bios and it will work.

Thanks

lferrara,

I don't have that option listed in bios unable to enable it. Is their anything else I can try?

Thanks

Chris

HI Chris , 

Could you provide us the system comfiguration allocation to XG . As for VT option you may refer the link below

http://www.howtogeek.com/213795/how-to-enable-intel-vt-x-in-your-computers-bios-or-uefi-firmware/

https://docs.fedoraproject.org/en-US/Fedora/13/html/Virtualization_Guide/sect-Virtualization-Troubleshooting-Enabling_Intel_VT_and_AMD_V_virtualization_hardware_extensions_in_BIOS.html 

I had to change the computer I was installing to because I was unable to find the needed option in bios to one that has it. Now I am receiving and error of no bootable device--insert boot disk and press any key after installation. Which I have tried same error. Also I am unsure what you are referring to as the "system configuration allocation to xg" ? Software Installers-->
Firewall OS Software ISO for Intel Hardware is the download installer that I used to install with is that the correct one? The current computer is a hp 15 notebook with needed virtualization option which was enabled in bios and legacy boot options which had to be enabled also to install from a boot usb thumb drive and still enabled. I am unsure what to do at this time Second computer I am trying with no luck still. Will I be able to download and install utm home properly if this does not work?

Thanks for your help 

Chris 

I had issues with the same "boot disk issue",

Turns out the boot disk wont even boot if you do not have the minimum required RAM and Disk allocated.

The Computer has 4gb ram and over 400 gb of hard disk space (not sure what Disk allocated? means) on it at the time of install.    

Still unsure what to do at this time?     

Thanks

Chris