This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RTL8139D don't recognised on XG FIrewall Home Edition

I have installed XG Firewall and this pci nic (RTL8139D) isn't recognised, even when it appears on the compatibility list for UTM, i'm stuck on failsafe mode.

This thread was automatically locked due to age.

Parents

0 lferrara over 8 years ago

Camillo,

thanks for sharing it. Are you sure your XG is complaining about missing NIC?

Can you post a picture of it?

Thanks
Cancel
Vote Up 0 Vote Down

Cancel
0 Camilo Martinez over 8 years ago in reply to lferrara

Yeah, because i have two nic's, a gigabit one, that onboard, and the pci realtek, it detects the onboard, but not the pci. After installation, it goes to failsafe mode because it only detects one nic and needs at least two.

PD: i'm trying to attach a picture but the page gives me an error, so here it is: http://imgur.com/a/PjyF0
Cancel
Vote Up 0 Vote Down

Cancel
0 lferrara over 8 years ago in reply to Camilo Martinez

sachingurung,

here Camillo is having problem with XG to recognize a NIC that is inside the HCL of UTM9, can you investigate and reply here back?

Thanks
Cancel
Vote Up 0 Vote Down

Cancel
0 sachingurung over 8 years ago in reply to lferrara

Hi All,

Official HCL for XG is not yet released, we were supporting the previous HCL for UTM but that seems to be not working. I will initiate a fresh request for this requirement and update it as soon as I have something over it.

Thanks
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 sachingurung over 8 years ago in reply to lferrara

Hi All,

Official HCL for XG is not yet released, we were supporting the previous HCL for UTM but that seems to be not working. I will initiate a fresh request for this requirement and update it as soon as I have something over it.

Thanks
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 lferrara over 8 years ago in reply to sachingurung

Saching,

we requested an official HCL more than one month ago and now we discover that that the UTM9 HCL cannot be used as reference. Sorry but this is something that community need and also is useful for you to know if a particular HW is not supported. It is a mess at the moment!

[:@]
Cancel
Vote Up 0 Vote Down

Cancel
0 Camilo Martinez over 8 years ago in reply to sachingurung

Hi, thanks for you reply, next week probably i will be testing a few nic's and report here if it work.

I will be waiting for your update.
Cancel
Vote Up 0 Vote Down

Cancel
0 JensStraten over 8 years ago in reply to Camilo Martinez

Hi Camilo,

I also found issues with the following two cards:

- Realtek RTL8111EVL

- Realtek RTL8110SC

While the XG recognizes them, they are not working properly (wrong connection speed [100MBit vs 1GBit, half-duplex vs full-duplex, DHCP problems, performance problems, etc.)

I can't help but noticing that your card is a Realtek card as well. So, maybe the Realtek drivers coming with the XG are not working properly?

Cheers,

Jens
Cancel
Vote Up 0 Vote Down

Cancel