Thread Info
  • State Verified Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 27 replies
  • Subscribers 32 subscribers
  • Views 74857 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG installation on HP MicroServer

kieran90

I've just tried to install the release version of XG 16 on my HP MicroServer Gen8 and I'm experiencing issues upon boot. Installation goes through just fine however after rebooting to boot into the system I get an error stating that no system disk was detected. I've tried everything I can think of such as enabling AHCI mode, IDE mode and trying booting from USB and CD. Has anyone experienced this issue? If so was a solution to this found?



This thread was automatically locked due to age.
Parents
  • +1

    Bumbing old thread :D

     

    I had similar problems, and it seems to be something on Microservers bios or so.

    Tested on buildin (fake)raid controller on legacy,achi,raid mode. No luck. Tested also on LSI 2008 based sas raid/hba controller, same thing.

    Installation goes without problems, and infact if i transfer the HDD to another machine XG boots on that without problems.

     

    I solved problem on mine side by creating bootable usb stick (http://www.easy2boot.com/) and edited that to boot by default on 1st HDD, and that way XG boots and works on Microserver without problems.

     

    M.

Reply
  • +1

    Bumbing old thread :D

     

    I had similar problems, and it seems to be something on Microservers bios or so.

    Tested on buildin (fake)raid controller on legacy,achi,raid mode. No luck. Tested also on LSI 2008 based sas raid/hba controller, same thing.

    Installation goes without problems, and infact if i transfer the HDD to another machine XG boots on that without problems.

     

    I solved problem on mine side by creating bootable usb stick (http://www.easy2boot.com/) and edited that to boot by default on 1st HDD, and that way XG boots and works on Microserver without problems.

     

    M.

Children