Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 26 subscribers
  • Views 10016 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bug in Sophos AP55 and throughput on 5ghz.

rfcat_vk

I have a couple of AP55 (brand new) and an AP55c. The AP55c is connected to a UTM 9.4 and the 5ghz shows channel 36.

The AP55 is connected to the XG and the 5ghz channel is 36.

The bug is the scanning function does not work the devices are within 3 metres of each other.

I tried another solution by forcing the AP55 to channel 140, but the Mac cannot see it, so I took the channel down to 44. The throughput on the 5ghz band is abysmal 6mb/s.

Somebody please tell me what I am doing wrong with respect to the 5ghz band and Sophos APs. Under previous versions of utm9 this was not an issue.



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to sachingurung

    Hi Sachin,

    thank you for the url, but no that did not apply.

    I already have both 2.4 and 5 ghz setup for WPA and AES. I don't use tkip and I can't see why any device would fallback to that settings on 5ghz but run okay on 2.4ghz.

    Looks to me very much like a bug. I did not have this issue in earlier versions of UTM 9.  I now have it on UTM and XG. With AP50mand AP55.

  • 0 in reply to rfcat_vk

    Hi,

    I think there is some defect in the AP55. Please get it checked from support and see if RMA is possible.

    Thanks

  • 0 in reply to sachingurung

    Hi Sachin,

    thank you for the suggestion, but being a home user I don't have access to support. This makes determining a problem with the APs difficult and even harder to request an RMA.

    The XG logs are not much use and I am not sure about the UTM logs for determining AP issues?

  • 0 in reply to rfcat_vk

    Hi,

    If you have an Sophos AP then it comes with a limited warranty where you can get a replacement. So I suggest you to write for an RMA at support@sophos.com .

  • 0 in reply to sachingurung

    Hi Sachin,

    I don't think it is an AP55 issue because I also experience the same issue with my older AP55c which is way out of warranty.

    I will need data to justify an RMA. I have two AP55s one on the XG and one on the UTM and both experience a similar issues.

    The issue really points at a software issue with the controller software in both cases. Why, because I used to be able to get over 300mb/s through the old AP55c on 5ghz and consistent 144mb/s on 2.4ghz through the AP10 and AP55c.

    The hardware has been changed for the XG but no affect on the default throughput.

    I bough the 2 AP55 to prove that the issue is a software one in the XG and UTM.

    I will submit a request for an RMA and see what happens.

  • 0 in reply to rfcat_vk

    I have submitted a request for an RMA, provided the additional information required and heard nothing since.

    I have tried a followup email message, but still no answer.

    Ian