Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 12 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 44807 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can not log in after installation

miklosrapidus

I decide to try this product as i have spare Intel hardware at home. Now everything seems to go correctly with installation. I have this one PC in SOphos lan and Wan in own port. Iam writing this thru my new Sophos machine. Monitor is prompting password. I have dhcp connection to 172.16.16.16 gateway, but then comes triky part. I can not get into web admin section at all. Regular htttp side states time out error and https side is telling me that its refusing such a port and connection.

I tried to find all question related to this but no luck. I just cant make initial log in. Now is there some trick to do it or should i just aband this product right at beginning?

Now i left everytinhg on for the night but yet in morning no luck.

Thanks for the help, or i did try with Chrome and firefox



This thread was automatically locked due to age.
Parents
  • 0

    Make sure your nics are set properly. NIC 1 should be the LAN and NIC 2 should be WAN. Also make sure you give the machine you are using to login a static address of something on the same subnet as the firewall. I usually punch in a random 4th octet like 172.16.16.100.

    The XG does not have DHCP enabled by default so a static IP is required to access the device for initial setup.

Reply
  • 0

    Make sure your nics are set properly. NIC 1 should be the LAN and NIC 2 should be WAN. Also make sure you give the machine you are using to login a static address of something on the same subnet as the firewall. I usually punch in a random 4th octet like 172.16.16.100.

    The XG does not have DHCP enabled by default so a static IP is required to access the device for initial setup.

Children
  • 0 in reply to jflex

    HI Every one, i seem to have the same issue, cannot login after installation, this box was setup about a month back, everything was working, then browsing stopped, i checked the console, everything looked fine.  i was able to ping the box but not able to access the web interface.  i then reinstalled the firmware, same thing, no access to the web interface, can ping to the box default ip and i am also getting a dhcp address from the box with an ip of 172.16.16.17/24.  i guess the firmware is broken.

    Sophos team.  Any ideas.

  • 0 in reply to MohammedTabrez

    Hello Everyone,

                             I had the same issue with my new box i made for my home network, it was working perfectly, all of a sudden i lost access to the web portal, tried renistalling a dozen times on three different drive, no luck.  Then i burned a DVD of the Copernicus Beta and installed it on the system, i got the console back, configured everything. Definitely a problem with the current version which Sophos team needs to address immediately.  UTM 9 still rocks. :) 

    The Firmware update centre shows that there is an update available to the current version, it downloaded but refuses to install.  Sophos team.. Whats up.. looks like they are taking steps backwards after the beta.. wakeup guys. address our issues. it will only help you make ur product better for your commercial users.