IPv6 renumbering -how

Hey rfcat_vk ,

Thank you for reaching out to the community, I believe  Sophos automatically renumbers in the event of IPv6 prefix changes and  Prefix changes are initiated by your ISP via DHCPv6 prefix delegation. To deactivate renumbering, unselect the checkbox and click Apply


For manually renumbering Specify the current prefix of the IPv6 addresses to be renumbered & Enter the prefix into the Old prefix field. To specify the new prefix enter the prefix into the new prefix field and then click apply, all IPv6 addresses with the defined current prefix will be renumbered using the new prefix.

Add an IPv6 router advertisement - https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Network/IPv6RouterAdvertisement/NetworkIPv6RouterAdvertisementAdd/index.html

Hi,

thank you for your answer. The suggestions you make as far as I can see only apply to the Sophos UTM, not the XG. The document you have referred to only works for the initial configuration of the IPv6 DHCP functions on the XG.

Ian

My guess is that you'll need to dump your configuration to JSON and change the prefixes in your DHCPv6 configuration -- if that's in there. Then load that back in.

My guess is that you'll need to dump your configuration to JSON and change the prefixes in your DHCPv6 configuration -- if that's in there. Then load that back in.

Hi Wayne,

I used HE and the European one as well as a local one all on a UTM which renumbered without an issues. I also had a second ADSL service, one which issued IPv6 natively connected to the UTM again IPv6 was not an issue.

I will investigate some of the exported backups to see if I can access the information and change it. The only issue coming from that is importing them leaves you with duplicated entries.

Ian

This really getting very annoying. I have exported the file, edited and created new tar file, but XG fails to recognise the format.

I am using tar i the mac terminal to create the tar file. I have tried with and without the extra material in the export but no luck. I now it works when you import an unmodified exported file. The new file will be a couple of hundred bytes larger then the  original.

Thoughts on what I am doing wrong?

Ian

I thought I had picked up all the files that needed amending, but appear to have missed oe because the amount of IPv6 traffic has dropped significantly. Prior to the attempts to change the IPv6 internal range IPv6 was the predominant traffic type.

More exploring to do.

Ian