Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 6 replies
  • Subscribers 31 subscribers
  • Views 1637 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP Firmware 11.0.017

Sebastien HENRY

Hello,

AP Firmware 11.0.016 is now available.

Where are the release note, please ?



This thread was automatically locked due to age.
Parents
  • 0

    Ok, in my case I had to delete the APX120s from the Active/Inactive list.  I then waited for them to appear in the pending list.  It took about 5 to 10 minutes but they changed from Inactive to Active.  They are now working.  I did the workaround posted in KB-000043597 first.  It appears that I needed the extra step to re-register them with XG after removing them from Central.  

    You need to do the workaround first; otherwise the XG will add them to the Active/Inactive list but the APX120 will never become active.

Reply
  • 0

    Ok, in my case I had to delete the APX120s from the Active/Inactive list.  I then waited for them to appear in the pending list.  It took about 5 to 10 minutes but they changed from Inactive to Active.  They are now working.  I did the workaround posted in KB-000043597 first.  It appears that I needed the extra step to re-register them with XG after removing them from Central.  

    You need to do the workaround first; otherwise the XG will add them to the Active/Inactive list but the APX120 will never become active.

Children