Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't access any other devices on LAN using XGS136

I'm new to the XGS line as I've only previously used the SG UTMs in production.

I'm setting up as follows:

Port 3 is used as a VLAN Gateway as follows:

These Vlans are then duplicated in an Ubiquity managed switch.

This all seems to work well as any device connected to any of the ports designated with the above vlans gets the right address.

So I connected my laptop, a synology and my printer to a vlan and all get the correct vlan ip address.

The trouble is none of these devices can see each other, they can't be pinged.

These are my firewall rules, nat and dhcp settings:

I've obviously missed something obvious Slight smile But I just can't seem to see it?!

Many thanks for any help.

Best wishes, Martin



This thread was automatically locked due to age.
Parents Reply
  • Thanks Ian, changing endpoint windows firewall didn't help.

    To take the vlans out of the equation I did the following:

    Bridged Ports 11 and 12 and gave it a range of 192.168.100.1/24.

    Connects to the internet but the 2 laptops on these interfaces can't ping each other even though they have address .2 and .3 on that subnet.

    So I've obviously messed up a firewall rule?

    Cheers, Martin

Children