Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 25 subscribers
  • Views 1456 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG210 in failsafe mode...

SHtan

Hello, I got locked out from the XG210 GUI and had to console into the FW to remove two NAT rules, via the console commands.

"psql.... "

I've just rebooted the FW and could get in via the GUI fine. I happened to get into console from the GUI(top right > console) and noticed the machine is now running in failsafe mode.

I checked with "show failure-reason" and the FW returned Unable to run NAT rules.

Is there a way to get out of the failsafe mode on console without clearing all configuration? 

Incidentally I have saved the FW configuration before running the NAT rules. Can i jsut overwrite the borked configuration?



This thread was automatically locked due to age.
  • 0

    I've went into factory reset mode and reloaded the config and FW rules. Console does not show failsafe now.

  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to Sophos Community.

    It is not recommended to delete/remove the configuration from the database as it has multiple connections with other tables/entities.

    Try rebooting the appliance and see if boots correctly or not. If this doesn't work then I'd suggest exporting selective configuration from Backup & firmware > Import-export, reset/restore the appliance to default, and import configuration back.