No bootable device after initial installation from USB Stick

Btw, it an Intel Family 12 Xeon Board.

Hi,

I would recommend that you disable the i219 serial NIC because it is not supported, but having said that I don't believe that is the issue.

What errors on the console do you see during boot sequence?

Ian

There is no boot sequence, its just like CSM is not enabbled. As it seams XQ does not support UEFI. Untill know it was working after enable CSM, but as I wrote the BIOS compains that the Intel Chipset (or) CPU does not support it anymore, maybe it would work with a 9 Gen CPU, but I dont have any.

There is no boot sequence, its just like CSM is not enabbled. As it seams XQ does not support UEFI. Untill know it was working after enable CSM, but as I wrote the BIOS compains that the Intel Chipset (or) CPU does not support it anymore, maybe it would work with a 9 Gen CPU, but I dont have any.

Hi,

I think this might answer your question, but does raise the question about none Sophos hardware support for the newer motherboards.

So the question will be is when will Sophos SFOS support UEFI boot?

none EUFI not supported

Ian

I actually wonder why Supermicro har that option, even if it does not workand if tehre is any workarround. That would mean that no board without CMS would work.