Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuring 50 Mbps ILL for single PC to check its performance

Hi,

We have Internet access from multiple ISPs which are configured in load balance. We have connected the new 50 Mbps ILL link on port4 of Sophos XG310 firewall (ver.18.4 MR4). Now we want to verify its performance. to check the performance, I have created a firewall LAN to WAN rule for a single PC with a source network local PC and destination network any.  Then created SNAT rule with Source Network local PC and SNAT Public IP Address of ILL. Inbound interface port1 and outbound interface port4. After the configuration, I checked "My IP Address" showing the public IP Address of another lLL.  Then I created an SD-WAN Policy route with source interface Port1 (LAN), Source Network Local PC Name, all other settings are any, and primary gateway port4. After that, it started showing the static IP address of the ILL. But when checked performance using speedtest.net, the download speed was around 50 Mbps but the upload speed was less than 7 Mbps. 

If I directly checked the link by terminating it on the laptop, it shows both uploads and downloads around 50 Mbps. I know I am doing something wrong. I can't ping static IP addresses of other ISPs connected to the same firewall even with this configuration.

Please suggest the correct configuration.



This thread was automatically locked due to age.
Parents Reply Children
No Data