Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 27 subscribers
  • Views 1912 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LAN traffic not passing through IPSec Tunnel

Sophos User4045

hi

i have XG18 firewall at head office where i have local network configured at port A  and interface IP is 192.168.3.50/24
It has WAN configured at Port 2 

i have another XG18 firewall at branch office where local network at Port A is 192.168.1.1/24

i have created the IP Sec tunnel between the two. Firewall rules have been created and IPsec tunnel shows connected.

i can ping the PC at head office 192.168.3.x from console of branch office firewall.

 

But i am not able to ping 192.168.3.100 from 192.168.1.100. There is no data transfer.

i am using Defaultbranchoffice IPSec policy at Branch office side and defaultheadoffice policy at head office side. 

please suggest.



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Sophos User4045

    Hello there,

    If the issue persists, SSH into the XG of the BO and in the Advanced Shell (5>3) run the following command:

    # ip route get 192.168.3.50 

    Also, confirm the SA is up by running 

    #ipsec statusall

    You should see an entry with Child: and both of the subnets the Local and Remote.

    Regards,

Children
No Data