Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 27 subscribers
  • Views 1598 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Internet and MPLS configuration

Wessk

Hi all,

I'm a little bit confused with the VLAN configuration on XG.

I'm running a XG210 with latest firmware

ISP has provided two IPs for Internet and MPLS.

  • Internet 41.17.258.41
  • MPLS 172.25.45.258

ISP cable goes to port 4.

  • port4.1125 - Internet
  • port 4.2552 - MPLS

The configurations seems not to work. Kindly assist on how I should do the configurations.



This thread was automatically locked due to age.
Parents
  • +1

    Hi  : Can you please share current configuration snapshot? Also if you have not configured VLAN over WAN then gateway may not came up. So configured Port4 with LAN or DMZ with any fake IP or network and then over same Port 4 click on add VLAN option and fill the the VLAN ID details given by ISP with VLAN zone as in WAN and fill the other required details given by ISP and this should make your Port4 VLAN Internet gateway status up.

  • 0 in reply to Vishal_R

    More details on configs

  • 0 in reply to Wessk

    Hi  : Thanks for sharing the snapshot. Is gateway status showing up or down? If  it is showing down can you confirm gateway IP ARP on XG?

    console> sy dia uti arp sh x.x.x.x ( where x.x.x.x is gateway IP). 

    You may manually initiate the ARP request to your gateway via console access.

    console >system diagnostics utilities arp ping source 1.1.1.1 interface Port4.XXX 1.1.1.2

    Where in the example 1.1.1.1 is the WAN configured on XG device and Port 4.XXX is the WAN interface and 1.1.1.2 is your Gateway address.

Reply
  • 0 in reply to Wessk

    Hi  : Thanks for sharing the snapshot. Is gateway status showing up or down? If  it is showing down can you confirm gateway IP ARP on XG?

    console> sy dia uti arp sh x.x.x.x ( where x.x.x.x is gateway IP). 

    You may manually initiate the ARP request to your gateway via console access.

    console >system diagnostics utilities arp ping source 1.1.1.1 interface Port4.XXX 1.1.1.2

    Where in the example 1.1.1.1 is the WAN configured on XG device and Port 4.XXX is the WAN interface and 1.1.1.2 is your Gateway address.

Children