Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 26 subscribers
  • Views 1207 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Access existing IPsec tunnel through SSL VPN?

Andreas Sandner

Hello,

I hope this is the right section.

On an XG105, we have an IPsec tunnel to a remote network set up (XG is on our location, the remote connection is a Lancom router). We also set up an SSL VPN connection to our location.

The question is, is there any way to allow users connecting to our location via SSL VPN to also access ressources from the remote location, connected via IPsec?

We added the tunnel to the permitted network ressources in the SSL VPN (remote access) configuration, but so far it doesn't work.



This thread was automatically locked due to age.
Parents
  • 0

    Hi  

    Please add SSL VPN Lease IP range in the Local Subnet in IPsec Configuration at XG side and Remote Subnet as a remote end device and reconnect the IPsec Tunnel.

    For example, the SSL VPN Lease IP range is 172.16.16.x/24

    Local Subnet XG IPsec - 172.16.16.x/24

    Remote Subnet Lancom IPsec configuration - 172.16.16.x/24

    Reconnect the IPsec tunnel, Create VPN to VPN zone firewall rule and communication will work.

Reply
  • 0

    Hi  

    Please add SSL VPN Lease IP range in the Local Subnet in IPsec Configuration at XG side and Remote Subnet as a remote end device and reconnect the IPsec Tunnel.

    For example, the SSL VPN Lease IP range is 172.16.16.x/24

    Local Subnet XG IPsec - 172.16.16.x/24

    Remote Subnet Lancom IPsec configuration - 172.16.16.x/24

    Reconnect the IPsec tunnel, Create VPN to VPN zone firewall rule and communication will work.

Children