Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 28 subscribers
  • Views 4672 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can connect via SSL-VPN but can't reach devices in LAN

Andreas Sandner

Hello,

I know this has been discussed before, but sadly I couldn't find a solution yet.

I configured SSL-VPN access and can connect successfully. However, I am unable to reach any device within the network. I can't even ping them.

There is another device at a different location that works, and I'm pretty sure the settings are identical, at least as far as I can tell - maybe there's a not so obvious setting somewhere that I missed. I even added an "allow all" rule, just in case that's the problem.

The only difference to the working system I can find is that there's an IPsec connection active, but that shouldn't influence the SSL VPN connection.

Does anyone have an idea what the problem might be?



This thread was automatically locked due to age.
Parents
  • +1

    Andreas Sandner said:
    I configured SSL-VPN access and can connect successfully. However, I am unable to reach any device within the network. I can't even ping them.

     

    The first thing you need to do, is create a FW Rule that allows VPN => LAN.

    Then you will need to permit the network (LAN) in VPN => SSL VPN => Configure, Inside Permitted Network Resources:

    Just creating the FW rule, without permitting the network inside the SSL VPN config won't work.

    Both needs to be permitted.

Reply
  • +1

    Andreas Sandner said:
    I configured SSL-VPN access and can connect successfully. However, I am unable to reach any device within the network. I can't even ping them.

     

    The first thing you need to do, is create a FW Rule that allows VPN => LAN.

    Then you will need to permit the network (LAN) in VPN => SSL VPN => Configure, Inside Permitted Network Resources:

    Just creating the FW rule, without permitting the network inside the SSL VPN config won't work.

    Both needs to be permitted.

Children
No Data