This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to change the IP-Address of the Captive Portal?

Hi Community,

when Users connect to the GuestWifi they get redirected to the Captive Portal, which is accessible under 10.0.255.1 - This behavior gives an SSL error because the IP-Adress is not in the SAN of the certificate. How can i change the Captive Portal to use an name instead of the Zone IP-Address?

Under Administration --> Admin console and end-user interaction the settings are configured to:

Use the firewall´s configured hostname: firewall.domain (this name is listed in my SAN-certificate).

When i use the button "Check settings", it also returns no errors.

Any suggestions?

Cheers.



This thread was automatically locked due to age.
Parents Reply
  • Hello Deepak,

    lt me answer your questions:

    I did select a hostname that is resolvable by our internal dns servers:

    1st and 2nd DNS-Servers are internal (DCs)

    The 3rd DNS-Server is from our ISP.

    They are static.

    **

    The DNS-Servers for the guests (WLAN) are both external (ISP).

    So, it´s not the same configuration.

    The guest users get an ip address from the range 10.0.255.0/24, the gw is 10.0.255.1

    Our internal network is 192.168.0.0/22

    I hope that helps. If you need anything more, i´ll provide.

Children
  • Hi,

    Make below changes as:

    Guest User's Primary DNS server: 10.0.255.1 (DNS must be allowed on the Guest Zone)

    Make some changes as below:

    1. Administration --> Admin Setting -->  Admin console and end-user interaction --> When redirecting users to the captive portal or other interactive pages:

    Use the firewall's configured hostname: XXXXXX.XXX.XXX
     
    2. Also, Select the connect certificate.
     
    Here, If you had assigned the hostname XXXXXX.XXX.XXX on your firewall then it will resolve with your LAN interface IP address only.