Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 28 subscribers
  • Views 3559 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

port forwarding headache

Marco Ferrante

Hello all,

I am trying to create a port forwarding rule to forward from the WAN(ANY) to an IP in the LAN ports 80, 443 and 8008 (both TCP and UDP).

 

Below is the rule I created on the XG (version SFOS 17.5.0 GA). I blocked every country except the USA.

I set the destination as the port/gateway, and the forward to the IP on the same port/gateway. 

I also tried to set the destination as the IP (10.0.0.102) but still doesn't work.

The only odd thing is that the 'Mapped Port' fields next to the protected server field are grayed out, I cannot enter anything.

I checked if the ports were opened canyouseeme.org and GRC shields up.

 

 

The forwarded services are the standard HTTP and HTTPS, for the customer service TCP/UDP 8008 I placed a snapshot below:

 

Last snapshot is the protected server, a single IP:

 

The rule is positioned after two prior rules to drop most foreign and some domestic traffic:

 

Any help would be greatly appreciated!



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to rfcat_vk

    Ian,

    Thank you so much for your input.

    I created an http and https item but the XG is still not forwarding any traffic.

    Even if I ignore http and https for the moment port 8008 should be forwarding but it's not working either.

    Do I need a rule to specifically just open the ports? And then the forwarding will take place?

Children