This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos AP Configuration Behind L3 Switch

Hello,

We have Sophos XG 430 firewall and Two Sophos access point(AP 55c and AP 100c).In network, we are using Cisco L3 switch where multiple VLANs are configured and We are using Windows server as DHCP server for users.

We have tried multiple time to register these device (AP) on Sophos firewall but no luck.

Now my query is,How can we manage these Sophos APs from network (behind L3 switch).

This thread was automatically locked due to age.

Parents

0 rfcat_vk over 6 years ago

Hi,

How have you configured the APs eg bridged to LAN or bridged to VLAN?

Are you able to see an IP address assigned to each AP in the DHCP server?

Are the APs on an Untagged port?

nI
Cancel
Vote Up 0 Vote Down

Cancel
0 NetlogicSolutions over 6 years ago in reply to rfcat_vk

Hi,

We want to configured it as bridged to VLAN because we have multiple VLAN on L3 switch and that VLAN's will make broadcast via SSID.

Yes, APs can get IP from Windows DHCP server but we are unable to see that AP on firewall.

APs are connected on Trunk Port.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 6 years ago in reply to NetlogicSolutions

Hi,

for initial registration APs need to be connected on an Untagged port. Then the configuration is changed for VLAN working.

Ian
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 rfcat_vk over 6 years ago in reply to NetlogicSolutions

Hi,

for initial registration APs need to be connected on an Untagged port. Then the configuration is changed for VLAN working.

Ian
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 rfcat_vk over 6 years ago in reply to rfcat_vk

Hi,

please have a read of this thread, it might help you.

https://community.sophos.com/products/xg-firewall/f/network-and-routing/86372/xg230-and-ap15c-multiple-ssid-s-as-vlan-s

Ian
Cancel
Vote Up 0 Vote Down

Cancel