Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 27 subscribers
  • Views 3151 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Keine NIC erkannt bei Zotac Zbox CI527 Nano

Admin Secure

Hallo,

ich habe mich für diesen Rechner entschieden, da er leistungsfähig und dennoch sparsam ist, dazu noch passiv gekühlt. Allerdings wird nach der Installation nur eine erkannte NIC angezeigt (vermutlich aber nur WLAN), die beiden NICs für das LAN aber nicht. Im BIOS sind sie aber aktiviert. Die Konsole auch nur in den FailSafe Mode.

Wo liegt das Problem und wie kann ich die beiden Netzwerkkarten nachträglich in das System bringen?

Vielen Dank im Voraus!

Torsten

XG-Version SW-17.1.3_MR-3-250

**************************************

Hello,

I opted for this computer because it is powerful and yet economical, plus passively cooled. However, after installation only a recognized NIC is displayed (but probably only WLAN), the two NICs for the LAN but not. But they are activated in the BIOS. The console only in the FailSafe mode.

Where is the problem and how can I bring the two network cards into the system later?

Thanks in advance!

Torsten



This thread was automatically locked due to age.
Parents
  • +1

    Hi  Thorsten,

    I have checked the site and it does not advise as to NIC type, but being designed for home use/consumer I would suspect one NIC will be i219 which is not supported by XG software.

    Also please be aware that the I3 is only a dual core.

    Ian

Reply
  • +1

    Hi  Thorsten,

    I have checked the site and it does not advise as to NIC type, but being designed for home use/consumer I would suspect one NIC will be i219 which is not supported by XG software.

    Also please be aware that the I3 is only a dual core.

    Ian

Children