Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 29 subscribers
  • Views 3517 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP55C cannot select Wireless Networks

twister5800

 

Running 17.1.3 at customers site, created networks, but cannot select any of them ,since new AP55c got adopted?!



This thread was automatically locked due to age.
Parents
  • 0

    Hello

    I would say that you have your Wireless Networks in another group, and because you are attempting to assign them to networks in the Default Group, nothing is showing.

    Check in the 'Access Point Groups' that the networks are in the default group, and the default group is enabled.

     

    Regards

    Gavin

  • 0 in reply to GavinDaniels

    You are correct! - Great spotted!

     

    Group on the Ap was default group, this group was empty, all I had to do, was to choose "None" as group, and the I could assign WLANS.

     

    Funny my XG at home, this was somehow in "None"  -group by default, and therefore I did not see that befpore (Note: I used UTM -> XG Conversion appliance)

     

    Thanks!!

Reply
  • 0 in reply to GavinDaniels

    You are correct! - Great spotted!

     

    Group on the Ap was default group, this group was empty, all I had to do, was to choose "None" as group, and the I could assign WLANS.

     

    Funny my XG at home, this was somehow in "None"  -group by default, and therefore I did not see that befpore (Note: I used UTM -> XG Conversion appliance)

     

    Thanks!!

Children
No Data