Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 16 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 13786 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HTTP scan downgrade the Wifi speed from M to K bits with iOS device

ShunzeLee
Dear All,
Our client faced a issue on HTTP scan and Wifi.
When enable HTTP scan, it will downgrade the Wifi Speed to K bits with iOS device.
 
I have upgraded the AP firmware to 11.0.005, but it can not resolve the issue.
 
Only uncheck the HTTP scan make the speed to M bits again.
 
Malware and Content Scanning as following.
 

I have opened a case, but support team haven't contacted me yet...

Any suggestion?

XG Firmware: SFOS 17.1.2 MR-2
AP Firmware: 11.0.005
 
Shunze 


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to ShunzeLee

    Hi Shunze,

    I have my APs at the higher throughput setting. My experience with the AP55 and MAC and iPad is the take awhile to ramp up during downloads and do show very poor performance unless big file is moved.

    Om 2.4ghz most devices idle at 72mb/s where as on 5ghz the MACs idea at 24mb/s with the wider bandwidth channels. Previously they idled at 6mb/s.The iphones on the other hand connect at about 300mb/s and quickly ramp to over 600mb/s just checking mail.

    The w10 machines connects most of the time at over 300mb/s on a 5ghz SSID.

    I hope this helps a little bit, but for any further digging you will have to wait until a support mod checks in or the product support team ring back.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Cookie Information Banner