Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 28 replies
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 55329 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG Home VLAN

NashBrydges

I am clearly missing something so I'm hoping someone here can help me out.

 

Here is the Sophos XG config (ignore GuestAP interface, it isn't in use):

Single VLAN interface using Port3.

This is the VLAN interface setup:

Here is the DHCP setup:

I am connecting a laptop directly into the physical port on the XG firewall for Port3 and manually assigning an IP address of 10.10.10.5. For some reason, I cannot ping Sophos XG firewall and have no access to the outside world.

Both Port3 and Port3.10 are in the LAN Zone and here is the Zone config:

When I leave the laptop in DHCP mode, it is assigned an IP in the 192.168.200.1/24 range and everything works as expected. But when manually assigned, nothing seems to work.

Here is my firewall rule:

What am I missing? This should work, correct?



This thread was automatically locked due to age.
Parents Reply
  • +1 in reply to NashBrydges

     

    I think the root of your issue is with hyper-v virtual switch. Do a google search for "hyper-v virtual switch and vlan" to see if your configuration is sound in your hyper-v. I have no experience with MS Hyper-V so at this point you are on your own unless someone in the forums has some familiarity with Hyper-V and VLANs.

    -Ron

Children