This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless and dhcp server

The AP110 seems to work only if you are using the ASG with the wireless subscription as a DHCP server, if you use another astaro or windows server as dhcp server the AP won't appear under pending access point.

Regards

This thread was automatically locked due to age.

0 nethole over 14 years ago

from this guide:

https://support.astaro.com/support/images/9/9f/Getting-started-guide-wireless-en.pdf

>
Cancel
Vote Up 0 Vote Down

Cancel
0 BrucekConvergent over 14 years ago in reply to nethole

As long as you are pointing the default gateway for the AP at an Astaro interface that is configured to listen for APs, it does not matter what DHCP server provides the address, so long as that DHCP scope configuration includes the proper gateway info.

CTO, Convergent Information Security Solutions, LLC

https://www.convergesecurity.com

Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Cancel
Vote Up 0 Vote Down

Cancel
0 Gert Hansen over 14 years ago

To perfiden this, the ASG must not directly the gateway, but on the way from th AP to the Internet, it must pass through an ASG, even if a 3rd party router is in between.
Hope that helps, regards Gert
Cancel
Vote Up 0 Vote Down

Cancel
0 nethole over 14 years ago in reply to Gert Hansen

Ok, now it works, i think that will be better if this is specified in the official documentation.

It works only if the dhcp is running, the AP rimain with a dynmic ip will be a good feature the ability to assign a static IP after the configuration.

What about wireless and ASG V8? When is planning the upgrade? I wonder if it will be available in the next 30/40 days.

Ceers
Cancel
Vote Up 0 Vote Down

Cancel
0 BrucekConvergent over 14 years ago in reply to nethole

It looks like Version 8.100 will be GA next week (the week of the 20th) ... there is already a soft-release version available at download.astaro.com. I suspect that you may be asking about the one-button upgrade supported from Version 7 to Version 8 on offical Astaro Appliances; my understanding is that the 7.509 up2date that will be released soon after Version 8.100 goes GA will be needed to jump to Version 8.100 via the one-button upgrade method.

CTO, Convergent Information Security Solutions, LLC

https://www.convergesecurity.com

Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Cancel
Vote Up 0 Vote Down

Cancel
0 nethole over 14 years ago

Thanks BrucekConvergent

Ceers
Cancel
Vote Up 0 Vote Down

Cancel