Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 1 subscriber
  • Views 3313 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF not working on Bridge setup.

howit
Hello,

I'm having a issue enabling WAF for my website, which has default gateway pointing to astaro's IP.

Astaro is running as a bridge.

I've enabled the WAF but I dont get any requests.

All I done was to create a Real Server with my web server IP, then create a virtual server with my domain, using the real server. Then the last step was enabling WAF. am I missing something?

thank you


This thread was automatically locked due to age.
Parents
  • 0
    When I'm working with WAF and run into an issue, I normally start with the features in the Firewall Profile off, then enable them one by one, testing as I go.  If I find one that's causing me problems, I keep it disabled.  It's the amazingly high skilled Trial and Error method.  ;P

    In your case, just disable any enabled features one by one until you find the one causing the issue.  Changes on the Web Server side aren't necessary.  There was one time though that I was making changes in WAF and connections stopped working until I restarted the Web Server process on the machine hosting the actual site.  I can't recall which feature/setting I changed when that happened though.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 0
    When I'm working with WAF and run into an issue, I normally start with the features in the Firewall Profile off, then enable them one by one, testing as I go.  If I find one that's causing me problems, I keep it disabled.  It's the amazingly high skilled Trial and Error method.  ;P

    In your case, just disable any enabled features one by one until you find the one causing the issue.  Changes on the Web Server side aren't necessary.  There was one time though that I was making changes in WAF and connections stopped working until I restarted the Web Server process on the machine hosting the actual site.  I can't recall which feature/setting I changed when that happened though.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?