Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 5938 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port Forward HTTP to Internal Server

dangerzone
I'm trying to port forward port 80 to my internal web server. I've created a NAT rule for that, but when I tried to visit my public IP it doesn't work. Webserver works locally. I'm new at this, someone please help.

Sophos UTM 9
Model: ASG Software
Firmware version: 9.305-4

Traffic From : ANY
Using Service: HTTP
Going to: External WAN ADDRESS

Change Destination: Webserver (192.168.0.11)
Service To :HTTP

pf.png


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BarryG
    Please post screenshots (hit 'Go Advanced' when posting) of your DNAT, firewall rules

    Also, look at your log files and post relevant log entries. Use the Full logs, not the Live Logs.
    See Rule #1 https://www.astaro.org/gateway-products/general-discussion/49065-rulz.html

    Barry


    There's nothing relevant in the Intrusion Prevention and Application Control logs. This is one of the entry from the firewall log.

    When I try to visit my public IP address this is what I get.

    2015:01:10-11:30:45 watchtower ulogd[27992]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60001" initf="eth0" srcmac="14[:D]a:e9:09:61:2b" dstmac="public mac" srcip="192.168.0.11" dstip="public ip" proto="6" length="52" tos="0x00" prec="0x00" ttl="128" srcport="63429" dstport="80"