Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 1 subscriber
  • Views 5123 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Slow web response w/ some timeouts

SalishSwede
I'm seeing some remarkably slow web response with only one user [me].
ASG system is a VM with 

[LIST=1]
  • 4 processors [very limited other uses on hypervisor]
  • 3 GB RAM
  • 0% Swap usage
  • Minimal disk usage
[/LIST]
Processor utilization is showing 4-10% utilization which is quite high from normal standards.


Looking down in the process utilization tools I see the following:  [complete listing below] Strike that... this system won't accept that much data in a post.


There are a set of defunct processes still taking up the processors time.
Is this acceptable or is something going on here that shouldn't.

  
 USER       PID  %CPU %MEM      VSZ     RSS   TTY        STAT   START     TIME   COMMAND 
root     12484   2.4         1.1      50684 34284 ?        S    07:29   0:10      \_ confd [worker[:P]rpc:webadmin] 
root     13557    3.2         0.0             0                0        ?       Z         07:36   0:00      \_ [confd.plx]  
root     13558    3.1         0.0            0               0        ?       Z       07:36   0:00      \_ [confd.plx]  
root     13559    3.6          0.0             0               0        ?            Z          07:36   0:00      \_ [confd.plx]  
root     13560    3.3          0.0            0               0        ?             Z          07:36   0:00      \_ [confd.plx]  
root     13563   3.8          0.0        0                 0       ?              Z         07:36   0:00      \_ [confd.plx] 


This thread was automatically locked due to age.
Parents
  • 0
    nopers..not adding layers troubleshooting base don information given.  if only the static machine is having issues put it on dynamic..or turn off it's firewall/security software..or both.  If that doesn't fix it then you have a hardware problem between the Astaro and the client(the client itself could be having issues).
Reply
  • 0
    nopers..not adding layers troubleshooting base don information given.  if only the static machine is having issues put it on dynamic..or turn off it's firewall/security software..or both.  If that doesn't fix it then you have a hardware problem between the Astaro and the client(the client itself could be having issues).
Children
No Data