Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 1 subscriber
  • Views 2661 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Displaying user names in Web Security Statistics

mactag
Hi,

I am trying to configure the Astaro to display usernames instead of IP addresses in Web Security Statistics.

So far I have set Operation Mode to Active Directory SSO and configured the browser proxy settings to The Astaro's FQDN. This allows connection to the Internet but still shows IP addresses rather than username.

Any suggestions will be appreciated.

Thanks,
Mark.


This thread was automatically locked due to age.
Parents
  • 0
    The 'Operation mode' on the 'Global' tab only applies to traffic not handled in a Proxy Profile.  In the pics, the Proxy Profile is set to "Standard mode", and that would result in the behavior you describe.

    Was that it?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    The 'Operation mode' on the 'Global' tab only applies to traffic not handled in a Proxy Profile.  In the pics, the Proxy Profile is set to "Standard mode", and that would result in the behavior you describe.

    Was that it?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Hi Bob,

    Sorting out the Proxy Profiles has fixed the problem. I have changed the Operational Mode to Active Directory SSO.

    Thanks for your help.

    Mark.
  • 0 in reply to mactag
    Hi Bob,

    Now that I have this working on one of my Astaro Gateway devices I am having problems with my other (production) one.

    Both devices are authenticating to the same Windows 2008 R2 server and the browsers are connecting to the relevant Gateways by name not IP. I have attached a screen shot of the log.

    I have tried removing the offending device and re-adding it to the domain but no luck. All other settings appear the same on both Astaro devices. Both are using firmware v7.510.

    Any suggestions?

    Thanks,
    Mark.
Cookie Information Banner