Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 16 replies
  • Subscribers 4 subscribers
  • Views 24866 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL Remote Access VPN and IPv6

danodemano

Hello,

I have my UTM 9.404 box setup for the remote access SSL VPN.  This works fine with IPv6 turned off.  However I would like to enable IPv6 (NOT FOR THE VPN) so that I can begin to leverage the expanded IP space for devices in my home.  However as soon as I get it all up and running the VPN breaks - I can connect but nothing routes.  If I switch IPv6 back off then the VPN starts working like it should.  I found this article (and tried the bottom 2 things) but it's still not working.  The first suggestion I am unable to do since both the IPv4 and ipV6 address on my WAN port are from DHCP.  

Just to make it clear I DO NOT care about using IPv6 on the SSL VPN but I don't see any way to disable it there.  Any advice would be appreciated.  I would rather not disable IPv6 globally just to get the VPN to work.

Thanks,

Dan



This thread was automatically locked due to age.
Parents
  • 0

    This just started happening to me, in this case on iOS using the OpenVPN client. The first time the vpn client connects to the vpn server (on a new IP) it works fine, the connection details show ipv4 ip and port..all is good. The second time around though, it somehow connects via ipv6, not even sure how....but once it connects via ipv6, I can't access any resources behind the VPN....any help?

     

    BTW, although it is apparent that my IPv4 addresses somehow have an IPv6 counterparts, I do not have ipv6 enabled anywhere in my UTM

  • 0 in reply to KentCalero

    Way to hijack my thread.  :(  My issue was never solved.  And it had nothing to do with IOS.  And it only happened with IPv6 enabled in the UTM.  So really your issue is in no way related.   ?????

  • 0 in reply to danodemano

    Hi Dan,

    IPv6 enable can you please show me where do you enable this? I will try to test the scenario but, prerequisites will be:

    1. Upgrade your UTM on the latest version.

    2. Which iOS version and device.

    3. Which VPN client and version (latest preferred)

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Reply
  • 0 in reply to danodemano

    Hi Dan,

    IPv6 enable can you please show me where do you enable this? I will try to test the scenario but, prerequisites will be:

    1. Upgrade your UTM on the latest version.

    2. Which iOS version and device.

    3. Which VPN client and version (latest preferred)

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Children
  • 0 in reply to sachingurung

    Hi Sachin,

    If you look through the original thread you will see it has nothing to do with iOS.  Kent hijacked it with a presumable unrelated issue.  Back in August I was running the latest version of the UTM and both the official client and a stock OpenVPN client fail to function with IPv6 enabled on the UTM.  I haven't tried it since as no solution was provided and I need VPN more than I need IPv6.

    Thanks,

    Dan

Unfiltered HTML