This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Problem with IP 10.242.2.14

We have a strange Problem with one of our UTMs.

When connecting via SSLVPN Client everything seems to work, except for the client getting the IP 10.242.2.14

On this station the connection is established, but no remote host is reachable...

Tried today with 4 simultanious connections: IPs .6, .10, .18 are working fine. .14 nothing reachable

disconnected 2 Clients, reconnected in different order, so the other machine gets the .14 and now this machine has the problem and the other one is working fine.

There are no errors in the SSLVPN or the Firewall Log.

Is this on known issue? Couldn't find anything...

Any ideas how to solve this problem?

Greets

Daniel

This thread was automatically locked due to age.

0 BAlfson over 9 years ago

Hi, Daniel, and welcome to the UTM Community!

Does route print on the client PC with .14 give any clues? When you don't have a client with the .14 IP, what happens when you ping 10.242.2.14 from the 'Suppport >> Tools' menu?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 DanielTenten over 9 years ago in reply to BAlfson

Hi Bob,
thanks for your reply!
This is the result of a ping from the UTM (with no.14 client present):
PING 10.242.2.14 (10.242.2.14) 56(84) bytes of data.
--- 10.242.2.14 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4031ms

At the moment the problem is not reproducable. The Client with the .14 ist working without problems...

I will write again when the problem appears again.

Greets Daniel
Cancel
Vote Up 0 Vote Down

Cancel