Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 3763 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to site VPN multiple remote subnet

tankovicsg
I have an Astaro hardware appliance with Sophos UTM 9.314-13

I have to make a site to site VPN connection with two subnets on the remote site.

One of them is 192.168.2.0/24 and the other is 10.32.0.0/16

The connection is up, but I only see the one subnet. 

I tried to create two vpn connection for separate subnets, but the situation was same. One subnet is working but the other one is not.

I tried to add 0.0.0.0/0 subnet for remote network, but in this case the VPN not connected.

How can I solve that problem? Any rule or other way? Or that problem is the other ends of the VPN connection?


This thread was automatically locked due to age.
Parents
  • 0
    It looks like the problem is on the other end - that they are not declaring the other subnet as a local network.

    Although not always needed, I usually start with 'Support path MTU discovery'.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    It looks like the problem is on the other end - that they are not declaring the other subnet as a local network.

    Although not always needed, I usually start with 'Support path MTU discovery'.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML