Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN SSL issue

Hi,

I try to setup a remote access SSL vpn, I did enable the SSL VPN and remove the Any from interface add an addtional IP 62.XX.XX.90 (was add from the interfaces and routing) and for the option Override hostname I use the same IP address 62.XX.XX.90
then destup VPN pool and after that create a VPN profile. now if I try to open:
https://62.XX.XX.80 from any browser get the message page cannot be dispalied.

I did setup VPN HTML5 with othere IP 62.XX.XX.20 and can open it also use IP 62.Xx.XX.10 for opening the sopho console and that also works.

Do I mis something here?

Thanks


This thread was automatically locked due to age.
Parents
  • You do not need the VPN client to access the User Portal, as it can be accessed externally.  Users authenticate on the User Portal sign in page, then have access to what you have set up for each user to have.... whether it be VPN, HTML5, or both.

    Once a user has the VPN client, they will not need the User Portal page any more, unless your apps in HTML5 are not accessible via VPN client.

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

Reply
  • You do not need the VPN client to access the User Portal, as it can be accessed externally.  Users authenticate on the User Portal sign in page, then have access to what you have set up for each user to have.... whether it be VPN, HTML5, or both.

    Once a user has the VPN client, they will not need the User Portal page any more, unless your apps in HTML5 are not accessible via VPN client.

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

Children
No Data