Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 1 subscriber
  • Views 3171 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to Site SSL VPN problem

legendz78
Able to establish a connection between sites, but cannot route traffic back and forth to see devices on each side.  Cant ping any devices on either end.


This thread was automatically locked due to age.
Parents
  • 0
    Do you have local and remote networks set properly on both sides?  Is each sides internal networks that you're trying to connect addressed as different subnets (one side 192.168.1.x and the other 192.168.2.x, for example)?  Are you using automatic firewall rules?  Are you trying to connect by IP, FQDN, or hostname?
  • 0 in reply to Scott_Klassen
    To answer both your questions both UTM's are running 9.310-11

    Both local subnets are different on both sides one is 10.3.10.0, the other is 10.1.0.0, automatic firewall rules are set on each side, when I connect I connect by each sides public ip.

    Using UDP as opposed to TCP.

    I also followed these instructions on how to initially setup the Site to Site SSL VPN.

    SETUP SSL SITE-TO-SITE VPN SOPHOS UTM - Techbast


    Do I need possibly some type of NAT or Masquerade rule?
Reply Children
No Data