Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 1 subscriber
  • Views 4121 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Single Host to use Internet of Hub via VPN

x1xxomx1xx
Hi all
I would like to setup the following

Site A CH Sophos UTM  192.168.30.0/24-> Site B USA Zywall USG 100  192.168.20.0/24

Client X from Site A uses Internet of Site B, all other clients of Site A use Internet of Site A 

I used to do this on a Zywall and did a Policy Route with a dedicated IPSEC Tunnel and selecting it for the route to 0.0.0.0 (ok, not that nice, but it worked). 

I setup the VPN according to the screenshots.


This thread was automatically locked due to age.
Parents
  • 0
    Well, it would have been easier if we'd known whether we were looking at pics from Site A or Site B. [:O]  That said, this is a common configuration.

    In Site A, 'Local networks' contains only the IP of Client X.  'Remote networks' contains "Internet" and any of the LANS of Site B that Client X should reach.

    In Site B, 'Remote networks' contains only the IP of Client X.  'Local networks' contains "Internet" and any of the LANS of Site B that Client X should reach.

    If everyone in Site A should be able to reach the LANs of Site B, make a separate VPN for that and do not put any LANs in the above.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    cool thanks, works like a charm...it was site A as Site B is a Zywall and would look rather differrent [:)]
Reply Children
Unfiltered HTML