This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN SSL Authenticated.. and after?

Goodmornig at all

i want to connect to my remote office lan.
i have a vm with sophos utm home ed ver.9.309-3 with only internal lan connected.i enter into the firewall from my home and have setup the ssl:
remote access-profile-ssl>create a ssl with the name of the user and local networks>internal(network).
in settings server settings is the same of original and have setup Override hostname>with my remote ip.
in virtual ip pool have setup VPN Pool(SSL).
from user portal download Sophos VPN client and login and connect correctly, i have assigned internel ip from VPN Pool(10.242.2.x).

and the question is how do to view the remote lan of my office(ping or netbios)?

i need to setup i rule on firewall or nat?

Tnx in advance, Enzo

This thread was automatically locked due to age.

0 Scott_Klassen over 10 years ago

Did you tick Automatic Firewall rules in the remote access profile? If not, you'll need to create manual firewall rules to allow traffic.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago in reply to Scott_Klassen

yes, as default
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago in reply to Scott_Klassen

yes, as default
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 10 years ago

Hi, Enzo, and welcome to the User BB!

In order to ping from the remote PC into the LAN, you still will need a firewall rule like 'VPN Pool (SSL) -> ping -> Any : Allow'. NETBIOS will be allowed by the automatic firewall rule, so any problems with that are outside the UTM as long as you've entered the WINS Server in the 'Advanced' section.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago

ok, my os is win 8.1 64b i have understand to start sophos vpn client as admin if i have an error when route go in excution.
not understod when put thw wins server and which is wins server?
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago

all right function...have inserted in firewall>NAT>masquerading a rule VPN Pool>Internal(network)..

eureka!!!
Cancel
Vote Up 0 Vote Down

Cancel
0 Hallowach2 over 10 years ago

That masq rule is usualy needed, if the machines on the internal lan don't know the route back to the vpn pool (e.g. utm is not their default gateway, ...). Is that true in your network?

Regards
Manfred
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago

yes right, gw is a router
Cancel
Vote Up 0 Vote Down

Cancel
0 zisaenzo over 10 years ago

now i need the netbios, i need to resolve the name
Cancel
Vote Up 0 Vote Down

Cancel
0 apijnappels over 10 years ago

Like BAlfson said already, for NETBIOS you need a WINS server. If you don't have one in your company network it will not work since netbios is broadcast traffic and that doesn't travel over your VPN.

Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.
Cancel
Vote Up 0 Vote Down

Cancel