Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 1 subscriber
  • Views 6968 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to Site VPN wont establish

Topcat
Hi,

We have a sonicwall we are replacing with a Sophos UTM 9 everything is working except the VPN to a vendor.

2015:03:11-18:51:43 utm01-1 pluto[25691]: "S_VPN" #6: ERROR: asynchronous network error report on eth1 for message to 1.1.1.1 port 500, complainant 2.2.2.2 : No route to host [errno 113, origin ICMP type 3 code 1 (not authenticated)]

Can anyone help? Is there anymore info I can get from the UTM to help find the problem

Tks
T


This thread was automatically locked due to age.
Parents
  • 0
    Both NAT-T and DPD should be enabled on both ends.  What happens if you reduce NAT Traversal keepalive in the UTM to 30 seconds?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Both NAT-T and DPD should be enabled on both ends.  What happens if you reduce NAT Traversal keepalive in the UTM to 30 seconds?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML