Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 3287 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM VPN

Apollo13
Hi,

May i ask how to setup Sophos UTM to SOphos UTM IPsec VPN site to site. Main UTM has public IP and the other UTM has dynamic IP. appreciate any advice.

Thanks!


This thread was automatically locked due to age.
  • 0
    First make sure to use the same policies on both ends. Second set-up the remote gateway on the fixed IP side as Respond Only so it will respond to a IPSEC request from the dynamic side. On the dynamic side you can create a remote gateway with Initiate  so the dynamic side initiates a connection to the fixed side.

    Thirdly configure the local and remote networks as you would with any other site-to-site VPN connection and either use Automatic firewall rule or create firewall rules yourself on both sides of the connection.

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

  • 0
    other UTM has dynamic IP

    The preferred method is to configure DynDNS in the "dynamic" site.  Otherwise, configure the "static" site with "Respond only" in the Remote Gateway.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML