This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing issue with L2TP VPN

I have setup L2TP on my UTM (office) and I can successfully connect to it from a Windows 7 client (home). However, I cannot PING the LAN at the office unless I add a ROUTE at home after connecting.

office LAN = 192.168.1.0/24
VPN Pool = 10.242.3.0/24
home LAN = 192.168.42.0/24

Attempt to PING 192.168.1.17 fails after connect (VPN IP = 10.242.3.2)

ROUTE ADD 192.168.1.0 MASK 255.255.255.0 10.242.3.2 METRIC 1
Ping to 192.168.1.17 succeeds.

I have fiddled and diddled with settings in the VPN connection to no avail.

This thread was automatically locked due to age.

Parents

0 vilic over 10 years ago

If you don't want to route Internet traffic through your L2TP VPN connection you should create VPN connection object with Microsoft CMAK tool and define internal routes manually in separate txt file.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 vilic over 10 years ago

If you don't want to route Internet traffic through your L2TP VPN connection you should create VPN connection object with Microsoft CMAK tool and define internal routes manually in separate txt file.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data