Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 1 subscriber
  • Views 21312 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM to RV042 router VPN

EvedLahut
Hello:
I am trying to create a site2site ipsec vpn tunnel with UTM.  No matter what I try I cannot get a successful connection.

Can the UTM connect to the Linksys/Cisco RV042 Router?
I have other tunnels currently working on the RV042.

Any help with this matter will be greatly appreciated.


This thread was automatically locked due to age.
Parents
  • 0
    Hi, EvedLahut, and welcome to the User BB!

    If you already have experience analyzing the RV042 IPsec logs, that's the place to start.  If you want help here with the UTM's IPsec log, turn off debugging, disable the IPsec Connection,  start the IPsec Live log, enable the IPsec Connection and show us the lines from a single connection attempt - should be less than 60 lines.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Hi, EvedLahut, and welcome to the User BB!

    If you already have experience analyzing the RV042 IPsec logs, that's the place to start.  If you want help here with the UTM's IPsec log, turn off debugging, disable the IPsec Connection,  start the IPsec Live log, enable the IPsec Connection and show us the lines from a single connection attempt - should be less than 60 lines.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Thank you, Gentlemen for your prompt resonse:

    Here is the output of the VPN livelog:
    2014:10:22-21:38:50 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #704: initiating Main Mode to replace #703
    2014:10:22-21:52:01 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #704: max number of retransmissions (20) reached STATE_MAIN_I1. No response (or no acceptable response) to our first IKE message
    2014:10:22-21:52:01 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #704: starting keying attempt 705 of an unlimited number
    2014:10:22-21:52:01 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #705: initiating Main Mode to replace #704
    2014:10:22-22:05:11 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #705: max number of retransmissions (20) reached STATE_MAIN_I1. No response (or no acceptable response) to our first IKE message
    2014:10:22-22:05:11 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #705: starting keying attempt 706 of an unlimited number
    2014:10:22-22:05:11 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #706: initiating Main Mode to replace #705
    2014:10:22-22:18:22 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #706: max number of retransmissions (20) reached STATE_MAIN_I1. No response (or no acceptable response) to our first IKE message
    2014:10:22-22:18:22 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #706: starting keying attempt 707 of an unlimited number
    2014:10:22-22:18:22 MMB-FIREWALL pluto[7157]: "S_HOME-TO-OFFICE" #707: initiating Main Mode to replace #706

    Her is the output of the RV042 VPN log:
    Oct 22 21:26:19 2014     VPN Log    No acceptable Oakley Transform, No Proposal chosen. Please check your SA or preshared key setting
    Oct 22 21:26:19 2014     VPN Log    No acceptable Oakley Transform, No Proposal chosen. Please check your SA or preshared key setting
    Oct 22 21:26:19 2014     VPN Log    (NATT)responding to Main Mode from unknown peer 99.101.13.34:581
    Oct 22 21:26:19 2014     VPN Log    Create a temporary connection for incoming Microsoft VPN Client negotiation packet.
    Oct 22 21:26:19 2014     VPN Log    [Tunnel Negotiation Info] 
Unfiltered HTML