Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 1 subscriber
  • Views 3488 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Empty Subnet IPSEC

allandresner
Hi everyone,

Setup IPSEC VPN for a single Mac Client, IP, Gateway, and DNS information being passed along but Subnet is empty.  I can ping IPs across the VPN, but no DNS resolution or other services possible, presumably without the gateway.  

Settings:
Firewall Rule
VPN Pool (L2TP) -> Any -> Internal Network

Definitions:
VPN Pool (L2TP)
10.242.3.0/24

LAN:
192.168.1.0/24

Remote Access: 
L2TP over IPsec
Interface: Uplink Interfaces
Authen Mode: Preshared Key
Assign IP address by: IP address pool
Pool Network: VPN Pool (L2TP)

Advanced:
DNS settings filled out

I presume it's something to do with rules and the VPN pool.  Any help is appreciated...thanks!


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BAlfson
    Please explain.

    Cheers - Bob


    Thank you, sure...

    DNS: 
    Primary and Secondary DNS are pointed to 2 Domain Controllers on my LAN.

    So while the connected via VPN device can ping the IP of the Domain Controller across the VPN, DNS resolution is not working.  I also tried to connect to a remote desktop session across the VPN using the FQDN and the IP of the remote desktop and the service did not work.  

    Thank you
Unfiltered HTML