Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 1 subscriber
  • Views 1620 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL-VPN -> VPN-Pool just for the UTM ?

Reveller
Hello together.

I use a SSL-VPN connection between an UTM9 and a Security Gateway V8 (SG8). The configuration of the ssl-vpn uses an virtuell Pool Network.

Now, on systems behind the SG8, I can see the original IP-Adresses from systems behind the UTM9. Just the packets from the UTM9 itself (I use syslog via UDP 514 to a system behind the SG8) performs a NAT. 

Is this a normal behavior?

Thanks and regards,
Rev


This thread was automatically locked due to age.
Parents
  • 0
    If you had to use a NAT rule, it's likely that you have a problem with #3 in Rulz.  Any luck with that?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    If you had to use a NAT rule, it's likely that you have a problem with #3 in Rulz.  Any luck with that?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML